Free Practice Questions for Cisco 010-151 Exam

Which important feature on the front end is provided to the clients by multiple servers that access the same storage devices across the SAN?

• recovery
  
• redundancy
  
• resiliency
  
• security
  
• storage
  

Which command can be used to exit to EXEC mode from this current mode? switch(config-if) #

• Ctrl-C
  
• Ctrl-L
  
• quit
  
• exit
  
• end
  

Which statement about RAID is true?

• RAID is a scheme used to logically combine several independent disks to form an array or group of drives.
  
• RAID provides data redundancy with either odd parity or even parity.
  
• RAID drive group appears to the host computer as multiple physical storage units.
  
• RAID parity information can be stored across multiple RAID levels.
  
• RAID stores data in the array with data striping, encryption, and parity to organize the data among the disks.
  

Which command-line interface mode is best described by this prompt?Switch (config) #

• Local management mode
  
• EXEC mode
  
• Boot mode
  
• Global configuration command mode
  

After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.Which four options should be verified? (Choose four.)

• Verify the power source to the equipment.
  
• Check for loose HDD cables.
  
• Reseat the DIMMs, CPU, and PCI cards.
  
• Verify that power supplies are receiving power.
  
• Reseat the mezzanine card connector.
  
• Check the CPU sockets for bent pins.
  
• Check the Cisco IMC for fan faults.
  

Which two statements are true about system controllers of Cisco Nexus 9500 Series? (Choose two.)

• They provide centralized arbitration to the system fabric for all line cards.
  
• They control the Layer 2 and Layer 3 services.
  
• The Cisco Nexus 9500 Series switch software, Enhanced NX-OS, runs on the system controllers.
  
• They are used to offload the internal non-data-path switching and management functions from the supervisor engines.
  
• The Cisco Nexus 9500 Series supports redundant system controllers.
  

Which two Cisco Nexus switches provide the foundation of the Cisco Application Centric Infrastructure? (Choose two.)

• Cisco Nexus 7718 switch
  
• Cisco Nexus 9508 switch
  
• Cisco Nexus 7710 switch
  
• Cisco Nexus 93128TX switch
  
• Cisco Nexus 6004 switch
  

Which two transceivers can support 100 Gigabit Ethernet? (Choose two.)

• SFP+
  
• SFP28
  
• QSFP+
  
• QSFP28
  
• SFP-DD
  

Which supervisor module is supported by a Cisco Nexus 7700 Series Switch?

• first-generation supervisor module
  
• second-generation supervisor module (Sup2)
  
• second-generation supervisor enhanced module (Sup2E)
  
• third-generation supervisor enhanced module (Sup3E)
  

Which two statements about PCIe are true? (Choose two.)

• The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.
  
• You can install a PCI Express x8 adapter into an x4 slot.
  
• The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.
  
• The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.
  
• A link that is composed of four lanes is called an x4 link.