Free Practice Questions for HP HPE0-S59 Exam

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

• If the D3940 module is imported in managed state that allows volume provisioning.
• If there Is a logical interconnect created based on the 12Gb SAS switches.
• If the D3940 storage module is property licensed through HPE OneView interface.
• If there is at least one ISCSI network configured that will provide access to the module.

Your customer wants to add dedicated Fibre Channel connectivity to the HPE Synergy frame running HPE Synergy 480 Gen10 compute modules, each with one CPU socket populated Currently they use two 12 Gb SAS switches and two HPE Virtual Connect SE 100Gb F32 Modules for HPE Synergy installed in third fabric.What must be done to enable dedicated FC connectivity for this HPE Synergy frame?

• A second CPU must be installed for all HPE Synergy 480 Gen10 compute nodes.
• For Brocade switches, a logical interconnect group must be created in HPE OneView.
• For VC-FC modules, all of server facing ports must be property licensed.
• SAS switches must be moved to second fabric and FC modules Installed in the first one.

Your customer has me following HPE Synergy setupThree frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosureTwo HPE Virtual Connect SE 100Gb F32 Module for SynergyFour HPE Synergy 50Gb interconnect Link ModuleSix HPE Synergy Virtual Connect SE 32Gb FC Modules The customer needs to add a frame.Which statement about the expansion of this setup is true?

• The additional frame must have HPE Virtual Connect FC modules installed
• The customer can grow the existing logical enclosure up to 5 frames
• The customer has to create a new logical enclosure for the additional frame
• The additional frame cannot have 12Gb SAS connection modules installed

Which statement about login redistribution is true?

• Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
• Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
• Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
• Login redistribution is used for login balancing when they are not distributed evenly over the FC links

Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?

• Pause flood protection
• Loop protection
• LLDP tagging
• Storm control

Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).What should you check during troubleshooting process?

• If HPE OneView credentials are added in vCenter Server
• If an compute nodes are added to the vCenter Server
• If the HPE Oneview instance Is integrated with HPE OV4VC.
• If vCenter Server is licensed in the HPE Oneview interface

Which statement about the SY480 Gen10 Plus Compute Module is true?

• It cannot be mixed with Gen9 compute modules in the same frame.
• It supports 8 memory channels and memory DIMMs of up to 256GB.
• It only supports NVDIMM Persistent Memory.
• It supports "3rd Gen AMO EPYC Server Processors with 64 cores.

What is one of me benefits of using HPE Composer 2?

• HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
• HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
• The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
• A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer

Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU socketsWhich HPE compute system meets the customer requirements?

• HPE ProLiant DL580 Gen10
• HPE ProLiant OL380 Gen 10 Plus
• HPE Synergy 480 Gen10 Plus
• HPE Superdome Flex system

Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

• HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
• Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
• HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
• Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities