Free Practice Questions for Juniper JN0-363 Exam

Which LSA type does an OSPF ABR use to advertise external routes generated by an NSSAASBR into the backbone?

• Type 5
• Type 7
• Type 3
• Type 1

An OSPF router does not have a router ID configured.In this scenario, which statement is correct about the router ID?

• The Junos OS will use the IP address assigned to the interface with the lowest MAC address.
• A router ID will not be assigned until it is manually configured.
• The Junos OS will use the IP address assigned to the loopback interface for the router ID.
• The Junos OS will use the IP address assigned to the Interface with the highest priority.

You are adding an IPv6 configuration to an Interface on a Junos device.In this scenario, which statement is correct?

• The link local address must be manually configured within the fdO0::/8 prefix range.
• The link local address must be manually configured within the fe80::/10 prefix range.
• The link local address is automatically created using the MAC address within the fe80::'l0 prefix range.
• The link local address is automatically created using the MAC address within the fd00::/8 prefix range.

What are two bridging concepts that are used to maintain an Ethernet switching table? (Choose two.)

• learning
• exporting
• aging
• timing

Which two statements are correct about the way that BGP propagates routes by default? (Choose two.)

• A route learned by EBGP will be re-advertised to IBGP peers.
• A route learned by IBGP will not be re-advertised lo IBGP peers.
• A route learned by EBGP will not be re-advertised to IBGP peers.
• A route learned by IBGP will be re-advertised to IBGP peers.

Interface ge-0/0/0.0 connecls yout network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP.In this scenario, how is this task accomplished?

• Remove interface ge-0/0/0.0 from OSPF.
• Create a generated route for Interface ge-0/0/0.0.
• Add ge-0/0/0.0 as a passive interface In OSPF.
• Configure a static route for Interface ge-0/0/0.0.

You are asked to configure an LSP which uses the OSPF link state database for path computations. Which two statements are correct in this scenario? (Choose two.)

• You must use the no-cspf parameter in the label-switched-path configuration.
• Traffic engineering extensions ate enabled by default In OSPF.
• Traffic engineering extensions are not enabled by default in OSPF.
• You must use the policing parameter in the label-switched-path configuration.

The segment touting SRGB start label Is 10,000 and the SRGB index range is 500.In this scenario, which two statements are correct? (Choose two.)

• The first usable label is 10,001.
• The last usable label is 10.501.
• The last usable label is 10,499.
• The first usable label Is 10,000.

Which BGP attribute Is used to detect touting loops?

• AS path
• MED
• local preference
• next hop

Which new field is added to an IPv6 header as compared lo IPv4?

• version
• checksum
• fragment offset
• flow label