Free Practice Questions for NetApp NS0-175 Exam

You want to ensure the uniqueness of the Cisco UCS WWNNs and WWPNs in the SAN for a FlexPod solution.In this situation, Cisco recommends using which WWN prefix for all blocks in a pool?

• 30:00:00:25:B5:XX:XX:XX
  
• 40:00:00:25:B5:XX:XX:XX
  
• 20:00:00:25:B5:XX:XX:XX
  
• 60:00:00:25:B5:XX:XX:XX
  

In which two sources would you verify scale out maximums for NetApp and Cisco UCS environments? (Choose two.)

• Cisco Configurations Limits
  
• Cisco UCS Hardware and Software Compatibility List
  
• NetApp Hardware Universe
  
• NetApp Interoperability Matrix
  

During a design meeting, a customer states that their goal is to deliver continuous availability across both network and storage during business continuity events. The customer has two data centers that are 80 km apart, and they want the configuration to be as logically unified across both sites as possible.In this scenario, which FlexPod data protection solution achieves this goal?

• FlexPod with NetApp Cloud Sync
  
• FlexPod with NetApp SnapCenter
  
• FlexPod with NetApp MetroCluster IP
  
• FlexPod with NetApp FabricPool
  

A customer has decided to deploy Red Hat OpenShift on a FlexPod solution, based in a published Cisco Validated Design. The customer intends to use the NetApp Trident to attach persistent storage to the customer's containers from the customer's NetApp AFF controllers.In this scenario, which two storage protocols are supported? (Choose two.)

• iSCSI
  
• FC
  
• NFS
  
• SMB
  

A customer wants to deploy a FlexPod Datacenter solution in a limited amount of rack space. After planning for the networking and storage devices required for the deployment, they realize they have six rack units of space remaining. They need to install as many servers as possible in this available rack space.In this scenario, which solution allows them to accomplish their objective?

• three Cisco UCS C4200 rack servers
  
• four Cisco UCS B480 M blade servers
  
• six Cisco UCS C220 M5 rack servers
  
• eight Cisco UCS B200 M5 blade servers
  

You are working with a customer on a new FlexPod solution. The customer advises you that they want a single point of contact for support issues.In this scenario, which two support solutions should you offer the customer? (Choose two.)

• Cisco SmartNet Total Care
  
• NetApp SupportEdge Expert
  
• NetApp Solution Support for FlexPod
  
• Cisco Solution Support
  

You want to direct-connect NetApp storage to a UCS Mini over IP.In this scenario, which storage protocol is supported?

• CIFS
  
• FC
  
• S3
  
• iSCSI
  

A customer wants to refresh their FlexPod solution by moving from 10 Gbps to 40 Gbps networking. They use FCoE to boot from SAN.In this scenario, which statement is true?

• FCoE is supported for 32 Gbps adapters
  
• FCoE is supported for 25 Gbps adapters
  
• FCoE is supported for 40 Gbps adapters
  
• FCoE is supported on only 10 Gbps unified adapters
  

A customer wants to upgrade their current VMware vSphere 6.5 environment to vSphere 7.x.Where would you go to determine which Cisco UCS configurations support this goal?

• Cisco UCS Hardware and Software Compatibility List
  
• NetApp Active IQ
  
• NetApp Product Documentation Guides and Resources
  
• FlexPod.com website
  

A customer wants a low latency and high IOPS FlexPod solution and decides on an end-to-end NVMe design.In this scenario, which three components are required to accomplish this task? (Choose three.)

• NetApp FAS with a 32Gbps FC HBA
  
• Cisco Application Policy Infrastructure Controller (APIC)
  
• Cisco MDS Series switches
  
• NetApp AFF with a 32Gbps FC HBA
  
• Cisco UCS Virtual Interface Card (VIC) 1400 series